Response Electronics CL6011B Especificações descarregar pdf (Página 88)

4Ć6 Device Definition Configuration

Original Ć June 1990CE4.2:CL6211

4.2 Device Definition

IAC and Computing Controller device definition consists of completing

the main device definition form, and associated forms to define FST

Registers, Operator Stations, and Auxiliary Engineering Units.

The main device definition form identifies the physical location of the data

concentrator unit, to which the controller is connected, on the PRoVOX

data highway and the controller type.

Type Ċ This field defines the controller type. Valid types are:

COMPUTING, IAC2, IAC3 ANALOG, IAC3 DISCRETE or IAC4.

Highway No. Ċ The highway number is the number of the data highway

that the data concentrator unit (DCU), to which the controller is

connected, communicates on. Valid highway numbers are 0 through 8.

Device No. Ċ The device number is the number of the communications

interface assembly (CIA) of the data concentrator unit (DCU), to which

the controller is connected. If the highway number is 0, valid device

numbers are 1 through 6. If the highway number is 1 through 8, valid

device numbers are 1 through 30.

Port No. Ċ The port number is the number of the data concentrator port

to be assigned to this controller. The port numbers correspond to the

card slots of the controller card files. If two simplex (non-redundant)

card files are connected to a data concentrator, ports 1 through 8 are

assigned to the card slots of one file, and ports 9 through 16 are

assigned to the card slots of the other file. If four redundant card files

are connected to a data concentrator, ports 1 through 4 are assigned to

the like-numbered pairs of primary and secondary card slots of the first

file, ports 5 through 8 are assigned to the like-numbered pairs of

primary and secondary card slots of the second file, and so on. Valid

port numbers are 1 through 16 (see note below).

Note

For an interactive controller, the port number

corresponding to the card slot position of the

MPU card must be selected. For example, if a

four-wide interactive controller is installed in

slots 1 through 4 of the first card file (simplex

or redundant), port number 4 is selected (the

MPU card is always in the right-most slot).

Not all ports are valid for interactive controllers

(i.e. no variety of interactive controller can

reside in port 1).

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 319 320

Sem comentários

Response Electronics CL6011B Especificações Página 88